TomTom CK 7W User Manual

Advanced Car Kit CK-7W  
User Guide  
Installation Guide  
9310692  
Issue 5 EN  
Contents  
For your safety......................... 4 3. Putting the Advanced  
Introduction ............................. 5  
Your Nokia Advanced Car Kit  
CK-7W...................................................... 5  
Bluetooth wireless technology.......... 6  
Bluetooth passcode............................... 6  
Connecting a mobile phone  
technology............................................. 17  
Pairing using a Bluetooth  
1. Getting started..................... 7  
Overview .................................................. 7  
Use of enhancements........................... 7  
Phone holder ....................................... 8  
Antenna coupler................................. 8  
GSM antenna ...................................... 8  
Remote control button ...................... 19  
2. Installation ........................... 9  
Safety information................................ 9  
Configuration........................................ 11  
Connecting a mobile phone  
using Bluetooth wireless  
technology ......................................... 11  
Connecting a mobile phone  
Operating the Advanced Car Kit ..... 20  
Accepting a call................................ 20  
Ending a call...................................... 20  
Rejecting a call................................. 20  
Making a call..................................... 20  
Redialling ........................................... 21  
Voice dialling..................................... 21  
Adjusting the volume...................... 21  
Manual search for Bluetooth  
devices................................................. 21  
Resetting paired Bluetooth  
devices................................................. 21  
Switching from handsfree mode  
to the mobile phone........................ 22  
using the data cable and  
a phone holder.................................. 12  
Installing the Advanced Car Kit....... 12  
Handsfree unit.................................. 13  
Remote control button................... 13  
Loudspeaker....................................... 14  
Microphone........................................ 14  
Cable set............................................. 15  
Data cable.......................................... 16  
Charger cable.................................... 16  
Function test......................................... 16  
Care and maintenance ........... 23  
3
F o r y o u r s a f e t y  
For your safety  
Read these simple guidelines. Breaking the rules may be dangerous or illegal.  
Further detailed information is given in this user guide.  
Keep all miniature SIM cards and accessories out of the reach of small children.  
ROAD SAFETY COMES FIRST  
Remember that the safety of operating a motor vehicle in traffic  
requires the full attention of all motorists. Only use your Advanced  
Car Kit if traffic conditions permit safe use and check if local laws/  
regulations restrict the use of mobile phones while driving.  
INTERFERENCE  
All wireless phones may get interference, which could affect  
performance.  
QUALIFIED INSTALLATION AND SERVICE  
Only a qualified professional may install or repair phone equipment.  
CONNECTING TO OTHER DEVICES  
When connecting to any other device, read the relevant user guide  
for detailed safety instructions. Do not connect incompatible  
products.  
FUSE REPLACEMENT  
Replace a blown fuse with a fuse of the same type and size. Never use  
a fuse with a higher rating!  
4
 
I n t r o d u c t i o n  
Introduction  
Your Nokia Advanced Car Kit CK-7W  
Advanced Car Kit equipment installation in the cockpit  
The Nokia Advanced Car Kit was developed for installation in motor  
vehicles to enable handsfree operation of mobile phones and use of  
individual phone features.  
A special emphasis was placed on quick and easy installation. A mobile  
phone can be connected to the Advanced Car Kit in one of two ways:  
using an optional phone holder with a cable or over a Bluetooth wireless  
connection.  
In some countries, use of the Advanced Car Kit may be restricted by law.  
Please observe the applicable rules/regulations.  
5
   
I n t r o d u c t i o n  
Bluetooth wireless technology  
Bluetooth wirteless technology is an international standard for short-  
range wireless communication. It allows you to establish a wireless  
connection within a range of 10 metres between your Advanced Car Kit  
and a compatible device.  
The Advanced Car Kit is intended for use with any mobile phone that  
supports the Bluetooth Handsfree Profile (Bluetooth HFP).  
The wireless connection between the compatible devices established  
using Bluetooth technology is free of charge for the user. In some  
countries, there may be restrictions on using Bluetooth devices. Check  
with your local authorities.  
Bluetooth passcode  
The first time you wish to establish a wireless connection to a  
compatible device using Bluetooth technology, you will need to input a  
passcode to pair the devices.  
The passcode is 0000.  
6
   
G e t t i n g s t a r t e d  
1. Getting started  
Overview  
The Advanced Car Kit includes the components shown above.  
• 1 Handsfree unit HF-5 with mounting plate MK-2  
• 2 Remote control button CU-7  
• 3 Loudspeaker HFS-12  
• 4 Microphone MP-2  
• 5 Cable set PCU-4  
• 6 Data cable CA-27  
• 7 Charger cable CA-116  
Use of enhancements  
Depending on the setup, a variety of optional enhancements are  
available to extend your Advanced Car Kit. Before any installation work  
is started, ask for professional advice on the enhancements that would  
7
     
G e t t i n g s t a r t e d  
best suit your needs. Use only approved enhancements. Ensure that only  
compatible products are connected to your Advanced Car Kit.  
Phone holder  
You will need a phone holder designed for a compatible mobile phone if  
the mobile phone is to be connected direct to the handsfree unit using  
the data cable.  
Antenna coupler  
An antenna coupler is required to connect an external antenna. A range  
of antenna couplers are commercially available for the mobile phones  
and phone holders on the market. An antenna coupler improves in-  
vehicle reception of the mobile phone.  
GSM antenna  
A compatible GSM antenna enables optimised wireless connections.  
If you have installed an external antenna, remember that in order to  
comply with RF exposure requirements for mobile transmitting devices,  
a minimum distance of 20 cm must be maintained between the antenna  
and all persons.  
8
     
I n s t a l l a t i o n  
2. Installation  
Safety information  
The basic safety guidelines set out below are to be observed when  
installing the Advanced Car Kit .  
Note:  
• Only qualified personnel should service the Advanced Car  
Kit or install it in a vehicle. Faulty installation or service  
may be dangerous and may invalidate any warranty which  
may apply to the unit.  
• The Advanced Car Kit may only be installed by a qualified  
service technician using the approved original Nokia parts  
supplied in the sales package. End users should remember  
that the Advanced Car Kit comprises complex technical  
equipment that requires professional installation using  
special tools and expert know-how.  
• Note that the instructions contained in this installation  
guide are general guidelines which apply for the  
installation of the Advanced Car Kit in an automobile.  
However, due to the wide variety of car types and models  
available on the market, this guide cannot consider the  
individual technical requirements relevant for any  
particular vehicle. Contact the vehicle manufacturer for  
further detailed information about the vehicle in question.  
• The Advanced Car Kit is suitable for use only in vehicles  
with a 12 volts negative grounding. Use on other supply  
voltages all alternative polarity will damage the  
equipment.  
• Remember that modern automotive systems include on-  
board computers where key vehicle parameters are stored.  
Improper disconnection of the car battery may cause loss  
of data, necessitating extensive effort for re-initialisation  
9
   
I n s t a l l a t i o n  
of the system. If you have any concerns, contact your car  
dealer before any installation work is done.  
• Do not wire Advanced Car Kit equipment to the high-  
voltage lines of the ignition system.  
• All equipment must be mounted so that it does not  
interfere with the operation of the vehicle.  
• Your service technician may be able to provide you with  
information on alternatives for mounting the equipment  
suitably in your vehicle without requiring boreholes.  
• The mount for the phone holder is to be fixed to the  
dashboard or to any other location in the cockpit area  
where the display is clearly visible for the user but does not  
impair control or operation of the vehicle. The keypad  
should be within easy reach of the driver.  
• Make sure not to impact the steering or braking systems or  
other key systems essential for proper operation of the car  
when installing Advanced Car Kit equipment. Check to  
make sure that deployment of the airbag is not blocked or  
impaired in any way.  
• Do not smoke when working on the car. Make sure that  
there is no source of fire or flame nearby.  
• Take care not to cause damage to electrical cables, fuel or  
brake lines or safety equipment during installation work.  
• RF signals may affect improperly installed or inadequately  
shielded electronic systems in motor vehicles (e.g.  
electronic fuel injection systems, electronic anti-skid  
braking systems, electronic speed control systems, airbag  
systems). Should you note a fault or change in the  
operation of such a system, contact your car dealer.  
• Ensure that cables are placed so that they will not be  
subjected to mechanical wear and tear (e.g. not laid under  
car seats or over sharp edges).  
10  
I n s t a l l a t i o n  
Configuration  
In principle, the Advanced Car Kit offers two different basic  
configurations for installation:  
Connecting a mobile phone using Bluetooth wireless  
technology  
To be able to establish a connection from a compatible mobile phone to  
the handsfree unit, both devices first have to be paired.  
A compatible mobile phone supporting Bluetooth wireless technology is  
required for this setup.  
11  
   
I n s t a l l a t i o n  
Connecting a mobile phone using the data cable and a  
phone holder  
When connected via the data cable, the compatible mobile phone is  
ready for operation with the Advanced Car Kit when placed into the  
phone holder.  
Depending on your mobile phone and your vehicle equipment,  
enhancements such as a phone holder, antenna coupler or external  
antenna may be required.  
Installing the Advanced Car Kit  
See “Introduction,” p. 5 for an example of a suitable installation of the  
Advanced Car Kit equipment.  
12  
   
I n s t a l l a t i o n  
Handsfree unit  
When installing the handsfree unit, ensure that the cables for the  
microphone and loudspeaker will reach the places you intend to mount  
these components.  
Take care not to mount the handsfree unit inside a closed metal housing  
or in a place in the car where it would be shielded from radio waves as  
this may impair the use of the Bluetooth feature.  
To mount the unit, first attach the mounting plate supplied with the  
Advanced Car Kit and then secure the handsfree unit using the screw  
that goes through the unit. Finally, insert the cover imprinted with the  
Nokia logo into the recess and press it into place.  
Remote control button  
The remote control button should be located so that it is within easy  
reach of the user. However, ensure that it is placed so that the cable for  
connection to the handsfree unit can be mounted. A suitable mounting  
position for the remote control button may be on the console between  
the front seats.  
A
C
D
B
13  
   
I n s t a l l a t i o n  
To mount the remote control button, use the hook and loop tape  
provided. First detach the two parts of the pads from each other. Attach  
the pad with the loops first: peel off the protective sheet from the  
adhesive side (A) and attach the pad to the desired location in your car  
(B). Make sure that the surface where you intend to attach the pad is dry  
and free from dirt and dust.  
Attach the pad with the hooks next: peel off the protective sheet from  
the adhesive side (C) and attach the pad to the underside of the remote  
control button.  
Press the remote control button (D) firmly onto the loop pad mounted in  
the car.  
Loudspeaker  
To ensure good acoustic quality, mount the loudspeaker so that it is  
pointed in the user’s direction. We recommend that you mount the  
loudspeaker a minimum distance of 1 metre away from the microphone  
to avoid feedback.  
The Advanced Car Kit also supports connection to a compatible car radio  
system. If you wish to use the car radio installed in your vehicle with the  
Advanced Car Kit for audio output, ask your service technician for  
professional advice.  
Connect the loudspeaker or a compatible car radio system to the  
"SPEAKER" output.  
Microphone  
Careful selection of the mounting location of the microphone can  
increase the quality of voice transmission.  
Mount the microphone approx. 30 cm from the driver’s head, and  
position it so that it points towards the driver’s mouth. Experience has  
shown that the best locations are near the rearview mirror or the sun  
visor. We recommend that you keep the microphone a minimum  
distance of 1 metre away from the Advanced Car Kit phone loudspeaker  
to avoid feedback.  
14  
   
I n s t a l l a t i o n  
Take care to mount the microphone so that it is not exposed to air  
streams from the vents. Do not lay the microphone cable in the heating,  
ventilation or AC system. Use the double-sided adhesive tape supplied  
to fix the microphone as this will prevent noise from the car body being  
transmitted into the interior.  
Insert the plug into the "MIC" socket in the handsfree unit and turn it  
clockwise to lock it firmly.  
Note: Use of any other microphone than the microphone MP-2  
supplied with the Advanced Car Kit smay impact the  
transmission quality.  
Cable set  
The wires making up the cable harness are to be connected as per the  
wiring diagram.  
• Connect the black wire to the vehicle ground (GND).  
• Connect the yellow wire to the MUTE connection of the car radio.  
If your car radio does not have a mute connection, this line may  
remain unconnected. In this case, your car radio will not be muted  
automatically during a call.  
An additional relay can be used to enable the car radio to be muted.  
When a call is accepted, the Advanced Car Kit switches the yellow  
line (MUTE) to ground, muting the car radio. When the call is ended,  
the yellow line is separated from ground and the car radio is  
unmuted.  
• Connect the blue wire to the IGNS line of the car using the 1A fuse  
supplied.  
15  
 
I n s t a l l a t i o n  
Some vehicles do not come with an IGNS connection. This line is not  
necessary for operation of the Advanced Car Kit; the blue wire can be  
left unconnected. However, in this case, the Advanced Car Kit does  
not switch off automatically when the ignition is turned off. To  
prevent accidental draining of the car battery, the Advanced Car Kit  
automatically switches off after two minutes unless a mobile phone  
is connected over Bluetooth wireless technology or the data cable.  
• Connect the red wire to the positive terminal of the 12V car battery  
using the 2A fuse supplied.  
The four-pin plug of the cable set is plugged into the "DC" port of the  
handsfree unit.  
Data cable  
The data cable connects the handsfree unit with a compatible mobile  
phone, i.e. via the phone holder.  
Plug one end of the cable into the "PHONE" socket in the handsfree unit  
and the other into the phone holder.  
If the Advanced Car Kit is to be used only with Bluetooth wireless  
technology, the data cable does not need to be connected.  
Charger cable  
The charger cable allows you to charge a compatible mobile phone  
while it is connected to the Advanced Car Kit over Bluetooth wireless  
technology.  
The charging cable can be used with compatible Nokia devices that have  
a 2.0-mm charger connector.  
Function test  
After your Advanced Car Kit has been installed, it needs to be checked to  
ensure that it is working properly. When testing the operation of the  
equipment, also check that it has been mounted so that it in no way  
impairs the driver during operation of the vehicle.  
16  
     
P u t t i n g t h e A d v a n c e d C a r K i t i n t o s e r v i c e  
3. Putting the Advanced Car Kit  
into service  
A compatible mobile phone can be connected to the Advanced Car Kit  
in one of two ways: over a Bluetooth wireless connection or using a  
compatible phone holder with a cable.  
Connecting a mobile phone using  
Bluetooth wireless technology  
The first time you establish a wireless link from your Advanced Car Kit  
using Bluetooth technology, you will have to pair the handsfree unit  
with the compatible mobile phone that you are using. This only needs to  
be done once: after this the devices will automatically recognise each  
other and establish the link.  
Note: If you wish to establish a connection using Bluetooth  
wireless technology, make sure that there is no mobile phone  
inserted in the phone holder.  
Pairing using a Bluetooth passcode  
1. Make sure that the mobile phone is switched on and the battery is  
charged.  
2. Switch on the Advanced Car Kit. For further information, see  
“Switching the Advanced Car Kit on/off,” p 20.  
3. Open the Bluetooth menu in the mobile phone and activate the  
Bluetooth function.  
4. Make the required settings on the mobile phone to activate a search  
for Bluetooth devices within range. For further information on the  
settings required on your mobile phone, see the relevant user guide.  
5. Select Advanced Car Kit from the list of Bluetooth devices found.  
6. When prompted, key in the Bluetooth passcode 0000.  
17  
   
P u t t i n g t h e A d v a n c e d C a r K i t i n t o s e r v i c e  
7. The mobile phone has now been paired with the Advanced Car Kit  
and is ready for operation.  
Note: The Advanced Car Kit can only establish a Bluetooth  
wireless connection to one compatible mobile phone.  
Therefore, you may need to end or break an existing Bluetooth  
wireless connection.  
Automatic pairing with a compatible mobile phone  
1. Make the appropriate settings in the mobile phone so that it will pair  
with your Advanced Car Kit without requiring separate acceptance  
or authorisation. For further information on the settings required on  
your mobile phone, see the relevant user guide.  
2. Switch on the Advanced Car Kit.  
3. The Advanced Car Kit now starts an automatic 30-second search for  
mobile phones that have previously been paired with it using the  
Bluetooth passcode. The Advanced Car Kit pairs with the mobile  
phone that it has last paired with. The active Bluetooth search is  
indicated by the flashing light on the remote control button.  
Connecting a mobile phone over the data cable  
If you are using this form of connection, the mobile phone is ready for  
use with the Advanced Car Kit when placed into the phone holder; you  
do not need to pair the devices.  
If a mobile phone is inserted into a phone holder connected to the  
Advanced Car Kit via the data cable, this phone is the active device and  
you will not be able to establish a connection to any device via  
Bluetooth wireless technology. Inserting a mobile phone that is  
currently involved in an active Bluetooth wireless connection into a  
phone holder connected to the Advanced Car Kit will cause the  
Bluetooth wireless connection to be terminated automatically.  
18  
 
O p e r a t i o n  
4. Operation  
The Advanced Car Kit can be controlled with the remote control button  
or operated using the keypad of a compatible mobile phone.  
Remote control button  
1 The button can be used as follows:  
• Press  
• Press and hold (approx. 1 second)  
• Press twice briefly  
• Press and hold for a long time (longer than 10 seconds)  
2 The ring can be used as follows:  
• Turn to the left  
• Turn to the right  
3 The indicator light has three states:  
• On  
• Flashing  
• Off  
19  
   
O p e r a t i o n  
Switching the Advanced Car Kit on/off  
When you turn on the ignition of your car, you automatically switch on  
the Advanced Car Kit. The indicator light goes on to show that the  
Advanced Car Kit is activated.  
When you turn off the car ignition, you deactivate the Advanced Car Kit  
and the indicator light goes off.  
If the Advanced Car Kit has been installed without connecting the  
ignition sense cable (IGNS), to switch the Advanced Car Kit on, either  
press the button briefly or insert a compatible mobile phone in the  
phone holder, if one has been installed.  
Note: If the Advanced Car Kit has been installed without using  
the IGNS cable, when switched on, it will stay in service as long  
as a compatible mobile phone remains in the phone holder.  
If there is currently no connection to a mobile phone, the  
Advanced Car Kit will switch itself off after 2 minutes.  
Operating the Advanced Car Kit  
You can use the remote control button to access the following phone  
features:  
Accepting a call  
To accept an incoming call, press the button.  
Ending a call  
To end an active call, press the button.  
Rejecting a call  
If you do not wish to accept a call, press and hold the button.  
Making a call  
Select the desired entry from the phonebook of the mobile phone or key  
in the desired number on your mobile phone.  
20  
           
O p e r a t i o n  
Redialling  
To redial a number that you have recently called, press the button twice  
briefly.  
Voice dialling  
You can use voice tags that you have saved in your mobile phone:  
1. To start voice dialling, press and hold the button until you hear a  
tone.  
2. Say the voice tag.  
3. The mobile phone plays the voice tag and dials the corresponding  
phone number.  
For details on using voice dialling, see the user guide of your mobile  
phone.  
Note: Some mobile phones may not support all the functions  
described in this user guide.  
Adjusting the volume  
To adjust the loudspeaker volume, turn the ring.  
Manual search for Bluetooth devices  
If you have not established a connection to a mobile phone, you can  
start a manual search for a mobile phone that supports Bluetooth  
wireless technology.  
To activate the Bluetooth search feature in the Advanced Car Kit, press  
and hold the button.  
If the search for Bluetooth devices is active, the indicator light will begin  
flashing.  
Resetting paired Bluetooth devices  
The Advanced Car Kit saves the last 7 Bluetooth devices that it has been  
paired with.  
21  
         
O p e r a t i o n  
The list of paired Bluetooth devices can be erased. To erase the list, the  
Advanced Car Kit must be switched off (indicator light goes off):  
Press and hold the button until a signal tone indicates that the list has  
been erased.  
Switching from handsfree mode to the mobile phone  
• If you have connected a compatible mobile phone to the Advanced  
Car Kit using the data cable, take the phone out of the holder to  
switch operation from handsfree mode over to the mobile phone.  
• To change back to handsfree mode, replace the mobile phone in the  
holder. The mobile phone is now used in handsfree mode via the  
Advanced Car Kit.  
• If you have connected a compatible mobile phone to the Advanced  
Car Kit using Bluetooth technology, you can switch the active call  
between the Advanced Car Kit and the mobile phone or vice versa.  
Press and hold the button or use the corresponding function in your  
mobile phone.  
22  
 
C a r e a n d m a i n t e n a n c e  
Care and maintenance  
Your Advanced Car Kit is a product of superior design and craftmanship and  
should be treated with care. The suggestions below will help you to fulfil any  
warranty obligations and to enjoy this product for many years.  
Keep all enhancements out of the reach of small children.  
Keep the Advanced Car Kit dry. Precipitation, humidity and all types of liquids  
or moisture can contain minerals that will corrode electronic circuits.  
Do not use or store the Advanced Car Kit in dusty, dirty areas. Its moving parts  
can be damaged.  
Do not attempt to open the Advanced Car Kit. Non-expert handling may  
damage it.  
Do not use harsh chemicals, cleaning solvents or strong detergents to clean  
the Advanced Car Kit or the remote control button.  
Do not paint the Advanced Car Kit or the remote control button. Paint can  
clog the moving parts and prevent proper operation.  
If the Advanced Car Kit or the remote control button is not working properly, take  
the defective part to your nearest qualified service facility. The personnel there  
will assist you and, if necessary, arrange for service.  
23  
 

Venus Cell Phone User Manual
Sprint Nextel SprintVision Katana II User Manual
Sony Ericsson P910a User Manual
Samsung TS H653N User Manual
Samsung GT S5233T User Manual
Presto Scandinavian Design User Manual
Pioneer DEH P4050UB User Manual
Philips AZ1 133 User Manual
Oster Coffeemaker Series User Manual
Nokia 6750 User Manual